Products - The ASC1 and ASC2 Sanitizer Series

The ASC1 and ASC2 Sanitizer Series

Quality Water Solutions by Water-Right(c)

The ASC1 & ASC2 Sanitizer Series are the only multi-purpose water treatment systems that effectively removes hardness, iron and manganese, raise pH; and disinfects itself automatically during regeneration.

  • A single advanced water treatment system especially designed for well water with low pH.
  • Four units in one: removing hardness, iron, manganese and raising your water pH. No other equipment add-ons to buy. Single system design maximizes water pressure throughout your home.
  • Cleans and sanitizes itself automatically using Water-Right's chlorine generator. No chemicals, additives or special handling required.
  • Odors and problems caused by iron and sulfur bacteria are virtually eliminated.
  • Advanced, solid-state "system analyzer" (patent pending) monitors and communicates operating modes - even alerts you to low salt conditions.
  • Three models to choose from to best meet your family's needs.
  • Minerals and sometimes bacteria can enter your household water through the ground aquafier or the well itself. Many of these contaminants can end up trapped in your home's water softener system and, in - most cases, cannot be completely removed through normal system regeneration.

Now you can enjoy clean, softened water throughout your house thanks to an advanced line of self-sanitizing water treatment systems - the SanitizerTM.

Specifications and Performance

Model ASC1-1044 ASC1-1054 ASC1-1354
CapacityGrains/Lbs. NaCL(Tested on 27 GPGHard water at 3 GPM) Maximum 11,800@12.4 22,600@15.9 36,900@21.2
Medium 11,400@9.3 20,700@12.4 33.600@15.9
Minimum 7,300@3.2 16,400@6.1 28,300@9.5


Efficiency (gr./lb.) @ lowest setting 2,300 2,700 3,100
Maximum Water Hardness (GPG) 20 30 40
Minimum pH Corrected to 7 6.5 6 6
Total pH Adjusted Water at Continuous Flows 630 252 432
Service Flow  GPM vs. Pressure Drop 19gpm/15psi 17gpm/15psi 19gpm/15psi
Continuous Flow   GPM vs. Pressure Drop 9gpm/5psi 8gpm/5spi 9gpm/5psi
Water Pressure Range (PSI) 25-100 25-100 25-100
Water Temperature (oF) 33-100 33-100 33-100
Electrical Requirement (volts-hertz) 110-50/60 110-50/60 110-50-60
Pipe Size 1" 1" 1"
Tank Size         Media Tank 10"(w)x44"(h) 10"(w)x54"(h) 13"(w)x54"(h)
                       Brine Tank 18"(w)x33"(h) 18"(w)x33"(h) 18"(w)x40"(h)


ACS2

Model ASC2-1044 ASC2-1054 ASC2-1354
CapacityGrains/Lbs. NaCL(Tested on 27 GPGHard water at 3 GPM) Maximum 20,300@12.4 34,800@15.9 60,300@26.5
Medium 19,100@9.3 32.000@12.4 48,300@15.9
Minimum 11,100@3.2 22,900@6.1 28,200@9.3


Efficiency (gr./lb.) @ lowest setting 3,500 3,800 3,000
Maximum Water Hardness (GPG) 40 60 80
Maximum Iron 8 10 15
Service Flow  GPM vs. Pressure Drop 19gpm/15psi 17gpm/15psi 19gpm/15psi
Continuous Flow   GPM vs. Pressure Drop 9gpm/5psi 8gpm/5spi 9gpm/5psi
Water Pressure Range (PSI) 25-100 25-100 25-100
Water Temperature (oF) 33-100 33-100 33-100
Electrical Requirement (volts-hertz) 110-50/60 110-50/60 110-50-60
Pipe Size 1" 1" 1"
Tank Size         Media Tank 10"(w)x44"(h) 10"(w)x54"(h) 13"(w)x54"(h)
                       Brine Tank 18"(w)x33"(h) 18"(w)x33"(h) 18"(w)x40"(h)